IceJax I Adhesive-Mounted Snow Guards – 25 Pack Kit with SB-190 (Canada)

Canada Snow Guards · Genuine SnoBlox-Snojax · Kit

The IceJax I kit packs everything for 25 glue-down guards: 25 clear polycarbonate IceJax I, a tube of Surebond SB-190 snow guard adhesive and cleaning wipes. A compact, economical guard with a flat, forward-facing design — and a base that can flip over to straddle a minor rib.

Why your metal roof needs snow retention

Metal roofs shed consolidated snow in sudden releases — and everything below the eave pays for it: eavestroughs, vehicles, decks, gas meters. Holding the snowpack on the roof for a controlled melt is cheaper than any one of those repairs.

Small guard, honest job

In moderate snow zones, more small guards at closer spacing spread the hold evenly across the roof. Glued down with SB-190, the IceJax I adds no holes to the roof — just plan the install for warm weather, because the adhesive needs about 28 days above 10 °C (50 °F) to fully cure. Installing late in the season? Pick the screw-down IceJax I kit instead.

Fits

• Most metal panels with at least 76 mm (3 in) of panel flat
• Flat side down on the panel flat, or flipped over to straddle a minor rib
• Moderate snow-load regions and high-count layouts on a budget

What's included

• 25 × IceJax I clear polycarbonate snow guards
• 1 × tube Surebond SB-190 snow guard adhesive
• 8 × metal roof cleaning wipes

Specifications

Installation at a glance

• Lay out staggered rows starting 300–450 mm (12–18 in) up from the eave — the free layout sets the exact grid.
• Clean each mounting spot with the included wipes and let it flash dry.
• Apply SB-190 to the guard base, press it onto the panel and leave it undisturbed to cure.