Ancrage de toit à joint debout SSRA1 | Non pénétrant | Convient à 95 % des toits métalliques
1 / À pointe incurvée
$299.00 CAD
Passer aux informations sur le produit
Ancrage de toit à joint debout SSRA1 | Non pénétrant | Convient à 95 % des toits métalliques
$299.00 CAD
Non-Penetrating Fall Protection
SSRA1 Standing Seam Roof Anchor
Rated 5,000 lb clamp-on anchor for standing seam metal roofs. Fits ~95% of seam profiles. No holes. No leaks. 100% tie-off compliance.
- Non-Penetrating Seam Clamp
- 5,000 lb Rated
- ~95% Seam Fit
Ships from Canada • No duties • No border delays
The Problem: Penetrating Anchors on Standing Seam
A drill hole through a standing seam panel creates liability. You installed the anchor—which means you own the leak path forever. Roofers, solar installers, and contractors know this problem well. SSRA1 solves it by clamping to the seam itself, delivering a rated anchor without creating a single penetration.
Many contractors installing snow guards and snow bar systems on standing seam roofs use SSRA1 for safe roof access during installation work. You get compliant fall protection while maintaining the roof's integrity.
When SSRA1 is the Right Choice
- Standing seam metal roof — works across panel gauges and profiles
- Fall protection during roof access — snow guard installation, solar install, maintenance
- Seams in good structural condition — no denting or deformation
- Contractor who needs a rated tie-off without penetrations
Rated for Canadian Fall Protection
SSRA1 meets standard fall arrest anchorage load requirements. Rated 5,000 lb means it handles the forces of a sudden arrest reliably.
One component of a system: SSRA1 is the anchor point. You still need a rated harness, lanyard or self-retracting lifeline (SRL), and compliance with your provincial OHS regulations. Users must receive proper training.
Installation critical: Torque to specification. Under-torque is the primary failure cause. Inspect seam condition before clamping.
Three Core Advantages
Non-Penetrating Seam Clamp
Clamps directly to the standing seam panel. No holes. No roof warranty issues. No liability for future leaks.
~95% Seam Profile Fit
Fits the vast majority of standing seam roof profiles used across Canada—from residential to commercial metal roofs.
5,000 lb Rated Tie-Off
Delivers standard fall arrest anchorage load capacity. Same safety rating as penetrating anchors—without the hole.
When NOT to Use SSRA1
Screw-Down or R-Panel Roofs
SSRA1 is designed for standing seam. Screw-down and R-panel roofs need a different anchor approach. Contact us for alternatives on corrugated metal roofing.
Damaged or Compromised Seams
If the seam has dents, buckling, or structural compromise, clamp load may not distribute properly. Inspect the seam before installation.
Permanent Roof Anchor Requirements
SSRA1 is reusable and relocatable. If you need a permanent, fixed anchor for ongoing access, a different product category applies.
Residential Asphalt Shingle Roofs
SSRA1 is metal-roof specific. Shingle roofs require a different anchor type (see RIDGEPRO for steep-slope residential access).
Installation Guidance
Positioning for Maximum Reach
Position SSRA1 near the ridge for maximum fall-arrest reach down either slope. This reduces fall distance and provides maximum working radius.
Torque to specification: Under-torque is the primary failure cause. Follow the manual exactly. Over-torque can deform the seam clamp.
Inspect before you clamp: Check the seam for dents, splits, or compromises. Clean the seam of dirt or debris. Ensure the clamp will have solid contact across the seam profile.
Verify every installation: After initial clamping, tug on the anchor by hand. It should not budge. If loose, tighten further.
Key Installation Steps
- Inspect seam condition — no dents, solid panel
- Clean seam contact surface — remove dirt, debris
- Position clamp on seam — centered on seam line
- Tighten to spec — follow manual torque values
- Verify installation — manual tug test
Technical Specifications
| Specification | Details |
|---|---|
| Anchor Type | Non-penetrating seam clamp for standing seam metal roofs |
| Load Rating | 5,000 lb (standard fall arrest anchorage) |
| Seam Profile Fit | ~95% of standing seam roofs (check manual for profile compatibility) |
| Material | Stainless steel clamp and hardware |
| Roof Penetrations | Zero — non-penetrating design |
| Reusable | Yes — relocatable across standing seam roofs |
| Requires Installation Training | Manual provided; proper torque sequence critical |
| Shipping | From Canada — no duties, no border delays |
Common Applications
Metal Roofing & Seaming
Metal roofing crews installing standing seam roofs use SSRA1 to anchor themselves during installation work, ensuring 100% tie-off compliance.
Solar Installation on Metal
Solar installers working on standing seam metal roofs need safe access for racking and panel mounting. SSRA1 provides the rated anchor point.
Snow Guard & Roof Access
Contractors installing snow guards on standing seam need safe working positions. SSRA1 is the anchor for this installation work.
Frequently Asked Questions
Is SSRA1 truly non-penetrating?
Yes. SSRA1 clamps to the standing seam panel itself. The clamp distributes load across the seam profile without drilling, bolting, or puncturing the panel. Zero holes. Zero future leak liability.
Will SSRA1 fit my standing seam profile?
SSRA1 is designed to fit ~95% of standing seam roofs used in North America. Metal roof profiles vary by manufacturer. Check the SSRA1 manual for your specific seam geometry, or contact us at 437-475-2066 with your roof specs.
Is SSRA1 rated to Canadian fall protection standards?
SSRA1 is rated for 5,000 lb load capacity, which meets standard fall arrest anchorage requirements. Always verify compliance with your specific provincial OHS regulation (Ontario, Alberta, BC, etc.). SSRA1 is one component—you still need a harness, lanyard/SRL, and proper training.
Is this permanent or temporary?
SSRA1 is reusable and relocatable. It clamps to the seam and can be moved from one seam to another or removed entirely. If you need a permanent, fixed anchor, you're looking at a different product category.
Does SSRA1 ship from Canada?
Yes. SSRA1 ships from Canada. No duties. No border delays. Standard shipping timelines for Canadian addresses.
Ready to Install?
SSRA1 is in stock and ships from Canada. No duties. No border delays.