SnoBlox Ace Glue-Down Jumbo Snow Guards – 20 Pack Kit with SB-190 (Canada)

Canada Snow Guards · Genuine SnoBlox-Snojax · Kit

The big-face SnoBlox Ace, boxed for a glue-down install: 20 clear polycarbonate Ace guards, two tubes of Surebond SB-190 snow guard adhesive and bonus cleaning wipes. A 5-inch-wide face on a patented waffled base that needs only 3 inches of panel flat — and held 657 kg (1,449 lb) adhesive-mounted in ATI testing.

Why your metal roof needs snow retention

Metal roofs shed consolidated snow in sudden releases — and everything below the eave pays for it: eavestroughs, vehicles, decks, gas meters. Holding the snowpack on the roof for a controlled melt is cheaper than any one of those repairs.

More face, same narrow footprint

The Ace puts a 76 mm (3 in) tall, 127 mm (5 in) wide face against the snowpack while its base sits between ribs as narrow as 3 inches — no rib straddling needed. The waffled base grips the SB-190 for a stronger bond. Plan a warm-weather install: the adhesive needs about 28 days above 10 °C (50 °F) for full cure.

Fits

• Screw-down and standing seam metal panels with at least 76 mm (3 in) of flat between ribs
• Roofs where a wider guard face means fewer guards per row
• Glue-down installs with zero penetrations

What's included

• 20 × SnoBlox Ace clear polycarbonate snow guards
• 2 × tubes Surebond SB-190 snow guard adhesive
• Panel cleaning wipes

Specifications

Installation at a glance

• Lay out staggered rows starting 300–450 mm (12–18 in) up from the eave — we provide the layout free.
• Clean each mounting spot with the wipes and let it flash dry.
• Apply SB-190 to the waffled base, press the guard onto the panel flat and leave it undisturbed to cure.